build(deps): bump the github-actions group across 1 directory with 4 updates

[dependabot]

Bumps the github-actions group with 4 updates in the / directory: github/codeql-action/init, github/codeql-action/autobuild, github/codeql-action/analyze and actions/setup-node.

Updates github/codeql-action/init from 4.36.2 to 4.37.9

Release notes

Sourced from github/codeql-action/init's releases.

v4.37.9

• Update default CodeQL bundle version to 2.26.4. #4106

v4.37.8

No user facing changes.

v4.37.7

• Update default CodeQL bundle version to 2.26.3. #4085

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

v4.37.5

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

v4.37.3

No user facing changes.

v4.37.2

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

v4.37.1

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

v4.37.0

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

v4.36.3

No user facing changes.

Changelog

Sourced from github/codeql-action/init's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.9 - 26 Aug 2026

• Update default CodeQL bundle version to 2.26.4. #4106

4.37.8 - 21 Aug 2026

No user facing changes.

4.37.7 - 13 Aug 2026

• Update default CodeQL bundle version to 2.26.3. #4085

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995

... (truncated)

Commits

• cdf488f Merge pull request #4107 from github/update-v4.37.9-920ba7cd1
• 7243f38 Update changelog for v4.37.9
• 920ba7c Merge pull request #4106 from github/update-bundle/codeql-bundle-v2.26.4
• ecfa6e1 Add changelog note
• adcdf4a Update default bundle to codeql-bundle-v2.26.4
• 486fec2 Merge pull request #4099 from github/update-supported-enterprise-server-versions
• 134624c Merge pull request #4101 from github/dependabot/npm_and_yarn/npm-minor-457d82...
• ff43db8 Merge pull request #4103 from github/mergeback/v4.37.8-to-main-db488dde
• 4605e03 Rebuild
• 099c869 Update changelog and version after v4.37.8
• Additional commits viewable in compare view

Updates github/codeql-action/autobuild from 4.36.2 to 4.37.9

Release notes

Sourced from github/codeql-action/autobuild's releases.

v4.37.9

• Update default CodeQL bundle version to 2.26.4. #4106

v4.37.8

No user facing changes.

v4.37.7

• Update default CodeQL bundle version to 2.26.3. #4085

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

v4.37.5

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

v4.37.3

No user facing changes.

v4.37.2

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

v4.37.1

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

v4.37.0

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

v4.36.3

No user facing changes.

Changelog

Sourced from github/codeql-action/autobuild's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.9 - 26 Aug 2026

• Update default CodeQL bundle version to 2.26.4. #4106

4.37.8 - 21 Aug 2026

No user facing changes.

4.37.7 - 13 Aug 2026

• Update default CodeQL bundle version to 2.26.3. #4085

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995

... (truncated)

Commits

• cdf488f Merge pull request #4107 from github/update-v4.37.9-920ba7cd1
• 7243f38 Update changelog for v4.37.9
• 920ba7c Merge pull request #4106 from github/update-bundle/codeql-bundle-v2.26.4
• ecfa6e1 Add changelog note
• adcdf4a Update default bundle to codeql-bundle-v2.26.4
• 486fec2 Merge pull request #4099 from github/update-supported-enterprise-server-versions
• 134624c Merge pull request #4101 from github/dependabot/npm_and_yarn/npm-minor-457d82...
• ff43db8 Merge pull request #4103 from github/mergeback/v4.37.8-to-main-db488dde
• 4605e03 Rebuild
• 099c869 Update changelog and version after v4.37.8
• Additional commits viewable in compare view

Updates github/codeql-action/analyze from 4.36.2 to 4.37.9

Release notes

Sourced from github/codeql-action/analyze's releases.

v4.37.9

• Update default CodeQL bundle version to 2.26.4. #4106

v4.37.8

No user facing changes.

v4.37.7

• Update default CodeQL bundle version to 2.26.3. #4085

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

v4.37.5

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

v4.37.4

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

v4.37.3

No user facing changes.

v4.37.2

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

v4.37.1

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

v4.37.0

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

v4.36.3

No user facing changes.

Changelog

Sourced from github/codeql-action/analyze's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.9 - 26 Aug 2026

• Update default CodeQL bundle version to 2.26.4. #4106

4.37.8 - 21 Aug 2026

No user facing changes.

4.37.7 - 13 Aug 2026

• Update default CodeQL bundle version to 2.26.3. #4085

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995

... (truncated)

Commits

• cdf488f Merge pull request #4107 from github/update-v4.37.9-920ba7cd1
• 7243f38 Update changelog for v4.37.9
• 920ba7c Merge pull request #4106 from github/update-bundle/codeql-bundle-v2.26.4
• ecfa6e1 Add changelog note
• adcdf4a Update default bundle to codeql-bundle-v2.26.4
• 486fec2 Merge pull request #4099 from github/update-supported-enterprise-server-versions
• 134624c Merge pull request #4101 from github/dependabot/npm_and_yarn/npm-minor-457d82...
• ff43db8 Merge pull request #4103 from github/mergeback/v4.37.8-to-main-db488dde
• 4605e03 Rebuild
• 099c869 Update changelog and version after v4.37.8
• Additional commits viewable in compare view

Updates actions/setup-node from 6 to 7

Release notes

Sourced from actions/setup-node's releases.

v7.0.0

What's Changed

Enhancements:

• Add cache-primary-key and cache-matched-key as outputs by @​gowridurgad in actions/setup-node#1577
• Migrate to ESM and upgrade dependencies by @​gowridurgad in actions/setup-node#1574

Bug fixes:

• Remove dummy NODE_AUTH_TOKEN export by @​gowridurgad in actions/setup-node#1558
• Only use mirrorToken in getManifest if it's provided by @​deiga in actions/setup-node#1548

Documentation updates:

• Add documentation for publishing to npm with Trusted Publisher (OIDC) by @​chiranjib-swain in actions/setup-node#1536
• docs: Update restore-only cache documentation by @​priya-kinthali in actions/setup-node#1550
• docs: Update caching recommendations to mitigate cache poisoning risks by @​chiranjib-swain in actions/setup-node#1567

Dependency update:

• Upgrade @​actions/cache to 5.1.0, log cache write denied by @​jasongin in actions/setup-node#1569

New Contributors

• @​chiranjib-swain made their first contribution in actions/setup-node#1536
• @​deiga made their first contribution in actions/setup-node#1548
• @​jasongin made their first contribution in actions/setup-node#1569

Full Changelog: actions/setup-node@v6...v7.0.0

v6.5.0

What's Changed

• Update @​actions/cache to 5.1.0 and add security overrides for undici and fast-xml-parser by @​HarithaVattikuti in actions/setup-node#1579

Full Changelog: actions/setup-node@v6.4.0...v6.5.0

v6.4.0

What's Changed

Dependency updates:

• Upgrade @​actions dependencies by @​Copilot in actions/setup-node#1525
• Update Node.js versions in versions.yml and bump package to v6.4.0 by @​priya-kinthali in actions/setup-node#1533

New Contributors

• @​Copilot made their first contribution in actions/setup-node#1525

Full Changelog: actions/setup-node@v6...v6.4.0

v6.3.0

What's Changed

Enhancements:

• Support parsing devEngines field by @​susnux in actions/setup-node#1283

... (truncated)

Commits

• 8207627 Migrate to ESM and upgrade dependencies (#1574)
• 04be95c Add cache-primary-key and cache-matched-key as outputs (#1577)
• 7c2c68d docs: Update caching recommendations to mitigate cache poisoning risks (#1567)
• 6a61c03 Merge pull request #1569 from jasongin/update-actions-cache-5.1.0
• 30eb73b Resolve high-severity audit issues
• 4e1a87a Update dist
• 360237f Strict equality
• 4f8aac5 Bump @​actions/cache to 5.1.0, log cache write denied
• f4a67bb Only use mirrorToken in getManifest if it's provided (#1548)
• 0355742 Remove dummy NODE_AUTH_TOKEN export (#1558)
• Additional commits viewable in compare view